- 3.2 l for increased horsepower and torque.* - genuine mahle forged pistons with deeper valve pockets. - genuine mahle steel (st52) nikasil coated cylinders.** - piston pin bore is off center (deaxiated) for factory quiet operation. - 10.3:1 compression. - 98 mm big bore. - 22x58 racing wrist pins - 70.4 stroke. - made in Germany by mahle gmbh. - piston rings installed directly on the pistons for ease of installation. - complete set with cylinders, pistons, rings, wrist pins and clips. - kit weighs 21.03 lbs. (9.54 kg). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resista...(choose a part on the right to read more)

This is a high-quality replacement for original number, 911 211 021 60 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car. Please note: the corresponding right side i...(choose a part on the right to read more)

By ordering this article number, you will receive a reconditioned wishbone with newly pressed-in bearings. The calculated replacement deposit will be returned to you as soon as the old part has been received and checked. This item is also available with race bearings (85 shore).article number FVD 341 018 07at the reconditioning process includes full inspection of each track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. If your old part is not repairable we will inform y...(choose a part on the right to read more)

This is a high-quality replacement for original number, 911 211 022 10 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car.

This item may need to be sourced from ge...(choose a part on the right to read more)

The radiator is a critical engine component that needs to be inspected and cleaned of debris to keep them functioning efficiently. If damage is noticed, replace it with this hello OEM high-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We recommend replacing the upper and lower rubber mounts, part # 99110653701 and 99110653802 sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment. This part is the latest supersession and can also be used in place of part number 991 106 138 01.

This item may need to be sourced from ge...(choose a part on the right to read more)

Only for cars without pdcc ( active stabilizer ) bilstein b16 (pss10) suspension kits feature ride height adjustability with 10-stage manually adjustable dampers. Simply adjust compression and rebound settings, from comfort to competition, by rotating the setting number knob at the base of the shock. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Ride height is adjustable from 1.0 to -1.5 20-40mm (front) & -1.0 to -1.5 20-40mm (rear - minimum 1 lowering). Bilstein b16 (pss10) suspension allows you to enjoy the kind of precise suspension tuning formerly available only on race cars. We recommend purchasi...(choose a part on the right to read more)

This is a high-quality replacement for original number, 911 211 021 60 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911100 sold individually. 1 necessary per car. Please note: the corresponding right side is our part # 170211022

This ite...(choose a part on the right to read more)

This is a high-quality replacement for original number, 911 211 021 14 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911101 sold individually. 1 necessary per car. Please note: the corresponding right side is our part # 170211022

This ite...(choose a part on the right to read more)

This is a high-quality replacement for original number, 930 211 025 01 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911102 sold individually. Right or left side fitment. 2 necessary per car. Please note: this will not fit u.s. 3.0 l SC mode...(choose a part on the right to read more)

This is a high-quality replacement for original number, 930 211 025 01 manufactured by dansk. It is manufactured in stainless steel. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911102 sold individually. Right or left side fitment. 2 necessary per car. Please note: this will not fit u.s. 3.0 l SC models from 1980-83. We suggest our part # 100 2...(choose a part on the right to read more)

63,24mm ! (original 60mm) more air = more performance we will need for this rebuild your own part first to work on that. Please contact us before shipping for the rma number.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a high-quality replacement for original number, 930 211 029 01 manufactured by dansk. It is manufactured in stainless steel. It is a replacement part dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911103 sold individually. Right or left side fitment. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 ...(choose a part on the right to read more)

Is your exhaust tip a little old and unappealing to look at? Update it with this durable chrome plated stainless tip. This is a direct replacement for original part numbers, 901 111 245 00 and 901 111 245 01 and fits models up to 1989 with 60 mm (2.3 inches) diameter muffler exit pipes. T304 stainless steel. Chrome plated. 70 mm (2 3/4 inch) outer diameter. Original design and look. Slip on, does not require welding. Quality tuning part manufactured by dansk. They offer a complete line of replacement parts and tuning parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This ...(choose a part on the right to read more)

By ordering this part number you get after previous sending in, your wishbone overhauled with new silent blocs. Order separately if required 901 341 049 04 or 911 341 049 05 to. Should it not be repairable, we will inform you immediately.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Quality replacement part for original number, 911 511 010 03 grv. This is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Quality replacement headliner for original number, 911 555 055 155 00. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality, factory fitment and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Quality replacement headliner for original number, 911 555 055 157 00. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality, factory fitment and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is a high-quality replacement for original number, 911 211 021 14 manufactured by dansk. It is manufactured in stainless steel and includes the necessary brackets and tabs for a direct bolt on replacement. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911101 sold individually. 1 necessary per car. Please note: the corresponding right side i...(choose a part on the right to read more)

By ordering this part number you get after previous sending in your wishbone overhauled with new silent blocs back. Should it not be repairable, we will inform you immediately.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Don't let a worn, faded bellows detract from your cars exterior. Replace it with this replacement part for original number, 911 799 505 14. This is made by dansk, they offer a complete line of aftermarket replacement bodywork to complement the entire Porsche model range. All dansk aftermarket products are manufactured with quality and cost effectiveness in mind. Sold individually. 1 necessary per car. Passenger's side fitment (lhd).

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Quality replacement for original number, 911 608 102 02. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality, fitment and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Includes a fuel check valve, check valve seal, proper dust caps, terminal connectors and washers. Sold individually. 1 necessary per car. Please note: this is the fuel pump for the 924 / 911 and 928-models listed on the model fitment tab and the front fuel pump for the 930 3.3l and 965.

This ite...(choose a part on the right to read more)

Don't let a worn, faded bellows detract from your cars exterior. Replace it with this replacement part for original number, 911 799 505 15. This is made by dansk, they offer a complete line of aftermarket replacement bodywork to complement the entire Porsche model range. All dansk aftermarket products are manufactured with quality and cost effectiveness in mind. Sold individually. 1 necessary per car. Driver's side fitment (lhd).

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Stainless steel 4 point 914 hood pin kit

1970-1976 Porsche 914

Kit includes:
Laser cut 14ga 304 stainless steel base plates (qty 2)

Laser cut 20ga 304 stainless steel scuff plates (qty 4)

3-1/2" x 3/8" clear anodized aluminum hood pins (qty 4)

Stainless steel locking clips (qty 4)

Blind rivets and hex nuts

Another patrick motorsports usa exclusive - sold as a set - 1 per car

Alternate part numbers: bod 914gt hpk pms / bod-914gt-hpk-pms / bod.914gt.hpk.pms / bod914gthpkpms

Don't let a worn, faded bellows detract from your cars exterior. Replace it with this replacement part for original number, 911 799 505 13. This is made by dansk, they offer a complete line of aftermarket replacement bodywork to complement the entire Porsche model range. All dansk aftermarket products are manufactured with quality and cost effectiveness in mind. Sold individually. 1 necessary per car. Driver's side fitment (lhd).

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Don't let a worn, faded bellows detract from your cars exterior. Replace it with this replacement part for original number, 911 799 505 16. This is made by dansk, they offer a complete line of aftermarket replacement bodywork to complement the entire Porsche model range. All dansk aftermarket products are manufactured with quality and cost effectiveness in mind. Sold individually. 1 necessary per car. Passenger's side fitment (lhd).

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.